Application guide
(This guide is just meant in order to give a general idea about application.
Detailed instruction is supplied together with the product)
Detailed instruction is supplied together with the product)
1 - UNDERCOATING
a) NON ABSORBENT MATERIAL Directly pass to item c)
b) ABSORBENT MATERIAL Basecoat 1a must be applied polyurethane base,commercially available, on absorbing materials, such as gypson, wood, concrete, fiberglass, polyurethane etc…
c) Uniformly apply catalysed primer for Fantachrome.
Let it dry for an hour at 55-60°C.
After an hour drying the process can be started, but for a better result let resting for 12 hours and start the chroming process the day after. After getting dried it must not be touched with hands
2 - CHROMING STEP
a) To Activator 2b must be added the compound 2a. When it gets straw-yellow and it is ready to be applied.
It must be sprayed uniformly on the primer.
b) The surface must be properly and uniformly washed with bi-distilled water.
Pour into the large blue can 4a the liquid that is in the little can 4a; after that this mix can be put into the can of the chroming machine.
c) The chromed solution must be applied with 4a and 5b simultaneously. It must be sprayed from the bottom to the top.
d) The surface must be washed again properly and uniformly with bi-distilled water.
Now dry using compressed air from the top to the bottom.
3 - FINAL TOPCOAT
The final topcoat catalysed chrome effect or in various colours (gold -chrome - blue - green -red - brown etc) is to be applied. After applying the final top coat the product can dry for about an hour at 50°C or for 12 hours at room temperature.
CONCERNING POINTS 1. AND 3. THE PRODUCT MUST BE APPLIED WITH A NORMAL GUN.
CONCERNING POINT 2. THE PRODUCT MUST BE APPLIED WITH OUR SPECIAL MACHINE FANTACHROME